BASIC SI 1A/B & EVE SP-1 Serial Pinout

2020-03-07T08:20:27-04:00

If you need to make a cable for your serial port here are the pinouts.

CODE:

B.A.S.I.C SI1A/B Cable pinoutThis is also EVE SP-1 compatible1   2   3   4   5| 6 | 7 | 8 | 9 | 10| | | | | | | | | |* | * | * | * | * | /   /   /   /   /  *   *   *   *   *================================= Circuit Board  RS232 ConnectorDB9DB251  =  Clear to Send (CTS)852  =  Receive Data (RXD)233  =  Request to Send(RTS)744  =  Data Terminal Ready(DTR)4205  =  Transmit Data(TXD)326  =  Carrier Detect(DCD)187  =  Not Used8  =  Not Used9  =  Signal Ground(GND)5710 =  Not Used

The pdf of this is also available in the archive

Statistics: Posted by Milli — Sat Mar 07, 2020 7:20 am

SmartBASIC - A Coleco Adam Forum

BASIC SI 1A/B & EVE SP-1 Serial Pinout